Manual

7
ENGLISH
14. DISASSEMBLING THE BOLT
Under normal circumstances, the bolt doesn’t need to be disas-
sembled. It has been permanently lubricated by the factory. As
a rule, occasional inspection by the gunsmith of your franchised
MANNLICHER Dealer should be sufficient to ensure adequate main-
tenance. If you wish, you may ask an expert gunsmith to instruct
you in the disassembly and reassembly of the bolt. However, spe-
cial circumstances with no gunsmith available may require that the
bolt be disassembled, cleaned, and lubricated.
Disassembly:
Grip the bolt with your left hand.
Push in catch lever with your
right thumb and simultaneously
rotate the bolt sleeve clockwise
(arrow shows direction of rota-
tion) until it unlocks with an au-
dible click. Take off bolt sleeve
and extract firing pin assembly.
Now, all parts can be cleaned
and lubricated as required.
Any further disassembly should be done only by adequately trained
and skilled personnel (gunsmith).