Manual

5
ENGLISH
11. REINSERTING THE BOLT INTO THE RECEIVER
First, make certain that the magazine has been removed or locked
in second position and the weapon is unloaded! When reinsert-
ing the bolt into the receiver the rotary safety will be in “Lock“
position. Hold the bolt by the bolt handle and insert it into the
receiver. When inserting the bolt, rotate the bolt so that the bolt
handle slides into the slot of the receiver. Move rotary safety slide
to “Firing“ position and lock the bolt handle while simultaneously
pulling the trigger (to prevent cocking of the firing pin).
When doing so, the indicator pin at the rear of the bolt sleeve will
disappear.
12. UNCOCKING THE RIFLE
Make certain the weapon is unloaded and the safety is on “Firing
position“. The bolt handle is open.
WARNING:
DO NOT ATTEMPT TO UNCOCK A LOADED RIFLE!
When you are certain the rifle is empty, pull trigger and hold it
while pushing the bolt handle to the right and downward.
The indicator pin at the rear of the bolt sleeve will disappear
indicating that the weapon is uncocked.