Manual
8
ENGLISH
Inserting the magazine into the rifle
The magazine can be locked in the rifle in positions:
Normal position
Insert the magazine into the rifle
and press it in until it locks with
an audible click.
If the magazine is to be inserted
without any noise, the two snap
latches must be pressed against
each other and the magazine
pressed in until the two latches
lock. The inserted magazine will
be flush with the stock.
When the bolt is operated, a
cartridge will be chambered from
the magazine.
Second magazine position
Press the two snap latches of
the magazine against each other
and push magazine into the rifle
until the magazine latches on the
upper detent. In this position the
magazine will protrude from the
stock by approx. 5 mm / 0,9“.
When the bolt is operated, car-
tridges WILL NOT feed from the
magazine.