Installation & Assembly

English
Mannington
Glueless Assembly Instructions
Repairs
Always inspect panels before installation; however, if damage occurs after installation the following repair procedures may be used:
• If a panel is slightly damaged or chipped, ll the void with a Color Matched Filler. Several products are now available
to ll small chips.
• If a panel is severely damaged and must be replaced the ooring will need to be disassembled back to the damaged planks.
Determine the shortest distance from a sidewall and remove the molding. Lift up and out on the panels and remove the
entire row back to the damaged area. Replace the damaged plank and reassemble the ooring.
Maintenance
Mannington Laminate Flooring is very easy to maintain and is extremely resistant to wear and stains.
• Spot clean your oor as needed and completely clean when needed with Mannington’s Ultra Clean System.
• Occasionally vacuum or sweep to eliminate loose dust and debris.
• Wipe soiled spots with a cloth dampened with clean water or Mannington Ultra Clean. Make sure the cloth is thoroughly
wrung out. Never ood the oor with water or cleaner.
• After damp cleaning, dry the oor thoroughly with a clean cloth.
• Remove tough, stubborn stains such as paint, adhesive, asphalt, oil, etc. with alcohol, acetone or nail polish remover.
• Place rugs or oor mats on heavy trafc areas to avoid excess wear and tear.
• Place doormats in front of outside entrances.
• Never wax, polish or use soap. Doing so may damage the wearsurface, causing it to be slippery or to have
unattractive smudges.
• Never use a steam cleaner.
• Never use scouring powder products, steel wool or abrasives.
• Do not treat or seal Mannington Laminate Flooring panels after they have been installed.
Questions? Call Mannington Toll-Free at
1-800-FLOOR-US (1-800-356-6787).