Instruction manual

GB - 22
• If you notice any damage on the charger housing or power supply unit, have it
checked through by a specialist workshop and, if necessary, repaired or
replaced.
• Keep the tool out of children’s reach. Do not let anyone use the tool without
prior instruction on how to use it.
Intended purpose
This cordless screwdriver/drill is used for the following purposes:
- Screwing and unscrewing
- Drilling into wood, metal or plastic
Scope of delivery Tool description (Fig. 1)
1 Cordless screwdriver
1 18V battery pack
1 PSU
1 Charger
12 Screw bits
1 magnetic bitholder
1 double-side bit
1. On/off dead-man switch
2. Clockwise/anti-clockwise selector
switch
3. Keyless chuck
4. Battery pack
5. fastening clips
6. Torque adjuster ring
7. Charger
8. PSU
Technical data
a) Cordless screwdriver/drill
Nominal voltage: 18V
Turning speed w/o load: 0-550 rpm
Chuck: 10 mm
Sound pressure level (LPA): < 75 dB(A)
Vibration ≤ 2.5 m/s²
Weight incl. battery: 1.5 kg
The sound level may exceed 85 dB(A), so wear ear-protection!