Owner manual

13
SPECIFICATIONS
Maximum Input (Bypass through Line Amplifier) +30 dBv
Maximum Output +30 dBv
Headroom (referenced to +4 dBv) 26 dB
Frequency Response: 10 Hz to 70 kHz +/- 0.5 dB
THD & Noise (1kHz @ +4 dBm) .015%
Noise Floor (Gain set to minimum) -80 dB Wideband
Signal to Noise 116 dB typical (A wgt)
Maximum Gain (via trim on back) 5 dB to -5 dB
Maximum EQ Boost 16 dB lows, 11- 20 dB highs (see curves)
Maximum EQ Cut 20 dB lows, 11- 21 dB highs (see curves)
Power Consumption .35 Amps @ 115 VAC
Fuse 1 Amp Slo-Blo
Size (1U) 19" x 1.75" x 10"
Actual Weight 9 Lbs
Shipping Weight 12 Lbs
Manley Enhanced Pultec EQP1-A Equalizer