Safety Instructions

8
TWS CONNECTION
This function is only available if two of these speakers have been
purchased.
1. Turn on both two speakers, make sure both units haven't been
connected to other source devices via Bluetooth.
2. Press the TWS button on the bottom of any one speaker which is
default as the master unit, a beep will sound. When pairing has been
carried out successfully, the LED light of the connected slave unit stops
flashing and a sequence of beeps will sound. The master unit still
flashing LED light waiting to pairing Bluetooth, connect with your
playback device. Now these two units can be played and controlled
synchronously during the Bluetooth playback mode.
3. Press the TWS button again to break the current TWS connection,
the light LED light of the connected slave unit flashes and a signal of
sound sequence.
Notes :
1). The unit being pressed the TWS button will be default as the master
unit in Left channel, slave unit is in Right channel.
2). TWS function is only worked on the same model number with this
product.