Brand Portable TWS Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
Periods of Nonuse If the unit is to be left unused for an intended period of time, such as a week or longer, the power cord should be unplugged from the unit to prevent damage or corrosion. Servicing The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
LOCATION OF CONTROLS Top View Bottom View 3
Back View 1. Button -In Bluetooth/TF Card mode: press this button to return to the beginning of current track or skip to the previous track Button 2. -In Bluetooth/TF Card mode: press this button to skip to the next track.
3. – Button Press this button to decrease the volume level. 4. + Button -Press this button to increase the volume level. / Button 5. -Press and hold this button to turn the unit on or off. -Short press it to play/pause current playback 6. Button -Press and hold this button to turn the LED light on/off during power on. –Short press this button to change the color of the LED light. 7.
BATTERY CHARGING INSTRUCTION This unit operates on a built-in Li-ion battery that can be recharged by an USB power adaptor (not included) with a rated output of DC 5V/1A and up. CHARGING THE BATTERY FOR FIRST TIME 1.) Charge the built-in Li-ion battery a minimum of 3 hours prior to first use. 2.) The battery charging indicator lights red while charging and lights green when the unit is fully charged. Unplug the USB cable from the speaker once the battery is fully charged.
2. Rechargeable battery need to be cycled for maximum performance and longer battery life. If you don't use the player that often, be sure to recharge the battery at least once a month in order to keep the internal battery working properly. Battery Note and Care Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Li-ion batteries must be recycled. Do not dispose of in the trash. Charge batteries on a fireproof surface and away from flammable items or liquids.
TWS CONNECTION This function is only available if two of these speakers have been purchased. 1. Turn on both two speakers, make sure both units haven't been connected to other source devices via Bluetooth. 2. Press the TWS button on the bottom of any one speaker which is default as the master unit, a beep will sound. When pairing has been carried out successfully, the LED light of the connected slave unit stops flashing and a sequence of beeps will sound.
OPERATING THE SPEAKER IN BLUETOOTH MODE Pair the Speaker manually If the speaker has never been paired with a Bluetooth device before . You need to follow the pairing instructions below to link the speaker with your Bluetooth device . 1. When the speaker turned on, the defalt mode is Bluetooth.The LED light will light in different colors and the speaker is ready to pair with your Bluetooth device . 2. Activate Bluetooth on the compatible device, and set it to search for compatible devices. 3.
If the speaker has ever been paired with a Bluetooth device before. You need to follow the pairing instructions below to link the speaker with your Bluetooth device . 1. After turning on the speaker, the speaker will search for the last paired device . The operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device , a remind voice is heard and LED light will keep in orange and stop flashing . 2.
Troubleshooting Guide Should you experience difficulties in the use of this player, please refer to the following chart. Fault Speaker can't be powered on Cause Solution The battery level is too low. Recharge the battery. No Charging The USB power adapter is not plugged into a wall outlet Plug the USB power adapter into a wall outlet No Sound The battery level is too low. Volume set too low. No audio signal via the Bluetooth connection Speaker is not paired to the audio source.
Pairing does not work Check whether the audio source supports the A2DP protocol Audio source is switched off Switch on the audio source Bluetooth is switched off at the audio source. Switch on the Bluetooth function in the audio source. Bluetooth version is not supported. Use a different playback unit. Poor sound quality from a Bluetooth device Bluetooth device is almost out of range of the speaker Move your Bluetooth device closer to the speaker.
SPECIFICATIONS Power Input: Battery capacity (included): RMS output power: Max Play Time: Fully Charge Time: Bluetooth version: Bluetooth operation range: Max. Transmission Power: Working Temperature: Working Humidity: DC 5V 1A 3.7V 2000mAh 9W 10 Hours at 50% volume 3.5 Hours V5.0 up to 10 metres -2.27 dBm 0℃-35℃ 20%~80% The right to make technical and design modifications in the course of Continuous product development remains reserved.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.