Use and Care
 Part Number 040002909 5/13 13
Section 3
Operation
Touch Pad Features
The touch pad offers a series of pressure sensitive 
buttons to control ice machine operation and provide 
operational status.
ON/OFF
The On/Off Button is used to start and stop ice making. 
The blue light indicates whether the ice machine is in Ice 
Making (light on) or Off (light off).
DELAY 
Pressing the Delay button will start a delay period. The 
ice machine will finish the freeze and harvest cycle and 
then start the delay period.
• Pressing the button once will start a 4 hour delay 
period.
• Pressing the button twice will start a 12 hour delay 
period.
• Pressing the button three times will start a 24 hour 
delay period.
• Pressing the button four times will cancel the delay 
periods.
NOTE: The delay period will be cancelled if power is 
interrupted to the ice machine. When power is restored, 
the ice machine will start an ice making cycle.
CLEAN
Pressing the Clean button for 3 seconds will start a clean 
cycle. After the clean cycle is complete, the ice machine 
will automatically start an ice making cycle.
• Pressing the Clean button again within 30 seconds of 
the clean cycle starting will abort the clean cycle.
• Pressing the Clean button after 45 seconds into the 
Clean cycle will de-energize the On/Off LED and the 
ice machine will stop after the Clean cycle is 
complete.
Pressing the On/Off button will pause the Clean cycle. 
The On/Off light will flash on/off to indicate pause mode. 
Pressing the On/Off button again will continue the Clean 
cycle from the point of interruption.
BIN FULL
The Bin Full light energizes when the bin is full or is de-
energized if the bin is not full.
SERVICE
The service light indicates the machine needs attention.
• Refer to Section 5 for more information if this light is 
energized.
On/Off - Blue = Machine On
Off = Machine Is Off
Delay - Blue = Delay Mode On
Off = Delay Mode Is Off
Clean - Yellow = Clean Cycle On 
Off = Cleaning is Off
Bin Full - Blue = Bin Is Full
Off = Bin Is Not Full
Service - Red = Needs Service
Off = Doesn’t Need Service










