Troubleshooting guide

Installation and Service Manual

INSTALLATION

PURGE TUBE ROUTING

1. During installation of the LP-3 the carbonator tank

purge tube (A) must be properly routed to a drain.

The carbonator tank purge tube (A) may be ac-

cessed by removing the front panel of the LP-3. Clip

the tie strap (B) and uncoil the purge tube (A).

(see figure 1)

2. Route the carbonator tank purge tube (A) to the

opening beneath the ice bin drain elbow (C). Be

sure not to collapse or kink the carbonator tank

purge tube (A) during routing from the unit to the

drain. The purge tube (A) is connected to the pres-

sure relief valve (D) on the carbonator tank and must

be routed to a drain.

(see figure 2)

3. Strap the carbonator tank purge tube to the drain

hose and route to a drain. Follow all local and na-

tional plumbing codes when routing the carbonator

tank purge tube to the drain.

Pressure 

Relief Valve

FIGURE 1

FIGURE 2