Service Manual

Table Of Contents

30 Part Number 8014793 6/18

Step 10 Mix a solution of sanitizer and warm water.

Step 11 Use 1/2 of the sanitizer/water solution to

sanitize all removed components. Use a spray bottle

to liberally apply the solution to all surfaces of the

removed parts or soak the removed parts in the

sanitizer/water solution. Do not rinse parts after

sanitizing.

Step 12 Use 1/2 of the sanitizer/water solution to

sanitize all foodzone surfaces of the ice machine and

bin (or dispenser). Use a spray bottle to liberally apply

the solution. When sanitizing, pay particular attention

to the following areas:

• Side walls

• Base (area above water trough)

• Evaporator plastic parts - including top, bottom and

sides

• Bin or dispenser

Do not rinse the sanitized areas.

Step 13 Replace all removed components.

Step 14 Wait 30 minutes.

Solution Type Water Mixed With

Sanitizer 6 gal. (23 l)

4 oz (120 ml)

sanitizer