Service Manual
Table Of Contents
- General Information
- Model Numbers
- Installation
- Maintenance
- Sequence of Operation
- Troubleshooting
- Component Specifications
- Charts
- Diagrams
- Wiring Diagrams
- Flake Models
- Nugget Models
- Condensing Units
- Compressor Start Component Wiring
- Refrigeration Tubing Schematics
- UFF0200/UFF0350/UNF0200/UNF0300
- RFF0320/RNF0320 Air-cooled
- RFF0620/RNF0620/RNF1100 Air & Water-cooled
- RNF1020C QuietQube Head Section & RCUF1000 Condensing Unit
- RFF1220C & RCUF1000 Condensing Unit
- RNF2000C QuietQube Head Section & RCUF2200 Condensing Unit
- RFF2200C QuietQube Head Section & RCUF2200 Condensing Unit
- RFF1300 Air & Water-cooled
- RFF2500 Air-cooled
Part Number 000015433_03 5/20 25
Cleaning and Sanitizing
Maintenance procedures covered in this manual are not
covered by the warranty.
,
Caution
Use only Manitowoc approved Ice Machine Cleaner/
Descaler (part number 000000084) and Sanitizer (part
number 9405653). Do not mix Cleaner/Descaler and
Sanitizer solutions together. It is a violation of Federal
law to use these solutions in a manner inconsistent with
their labeling. Read and understand all labels printed on
bottles before use.
n
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling ice machine Cleaner or Sanitizer.
EXTERIOR CLEANING
Remove dust and dirt off exterior surfaces with mild
household dish-washing detergent and warm water. Wipe
dry with a clean, soft cloth.
DETAILED DESCALING AND SANITIZING PROCEDURE
This procedure must be performed once every 6 months.
• All ice must be removed from the bin
• The ice machine and bin must be disassembled
descaled and sanitized
• The ice machine produces ice with the cleaner/
descaler and sanitizer solutions
• All ice produced during the descaling and sanitizing
procedure must be discarded
Maintenance