Specifications

Part Number 80-1230-9 6/08 75
23. While components are soaking clean all foodzone
surfaces of the bin. Rinse all areas thoroughly
with clean water.
24. Mix a solution of sanitizer and warm water.
25. Use 1/2 of the sanitizer/water solution to sanitize
all removed components. Use a cloth or sponge
to liberally apply the solution to all surfaces of the
removed parts or soak the removed parts in the
sanitizer/water solution. Do not rinse parts after
sanitizing.
26. Use 1/2 of the sanitizer/water solution to sanitize
the dispenser bin, water trough and delivery
spout. Use a cloth or sponge to liberally apply the
solution. Do not rinse the sanitized areas.
27. Reinstall the removed parts, restore water and
power supply and test run the ice machine.
NOTE: Disconnecting and reconnecting the power
supply activated a 5 minute time delay. This delay
period can not be over ridden. The delay period will
start when power is restored and the ice machine
starts after the 5 minute delay period expires.
Solution Type Water Mixed With
Sanitizer 6 gal. (23 l) 4 oz (120 ml) sanitizer
SN12/SN20
Do not allow solutions to
drain through center hole