Specifications

50 Part Number 80-1230-9 6/08
Step 6 Refer to chart and premix the correct solution
of cleaner and cool water for your model ice machine.
Step 7 Remove the top cover from the ice chute and
pour the cleaner/water solution into the evaporator.
Add the entire amount of premixed solution (excess
solution will exit through the overflow tube in the water
reservoir).
Step 8 Replace the ice chute cover and allow the ice
machine to stand for 30 minutes.
Step 9 Turn on the water supply to the ice machine.
Step 10 Move the toggle switch to the ICE position.
The compressor will energize and produce ice with the
cleaning solution.
Step 11 The ice machine will freeze and discharge
the cleaning solution into the bin. Allow the cycle to run
for 15 minutes.
Step 12 Place the toggle switch in the OFF position
and refer to sanitizing procedure.
NOTE: Discard all ice produced during the cleaning
process. Cleaning and sanitizing must be performed
on adjacent surface areas not contacted by the water
distribution system. Refer to Removal of Parts for
Cleaning/Sanitizing - Disassemble, clean and sanitize
the ice machine a minimum of once every six months.
Model
Amount of
Cleaner
Part Number
000000084
Amount of
Water
SN12 SN20 2 oz (60 ml) 32 oz (1 liter)
SF0400 SN0450 2 oz (60 ml) 32 oz (1 liter)
SF0600 SN0650 3 oz (90 ml) 32 oz (1 liter)
SF0900 SN0950 4 oz (120 ml) 32 oz (1 liter)
SF1200 SN1250 8 oz (235 ml) 64 oz (2 liter)
SF2000 SN2050 8 oz (235 ml) 64 oz (2 liter)