Specifications

Part Number 80-1230-9 6/08 101
Removal of Parts for Cleaning or Sanitizing
QC0700/QF0800/QF2200/QF2300
1. Turn off the water supply to the ice machine at the
water service valve, or disconnect water supply
line at float valve quick disconnect by depressing
stainless steel lever.
2. Remove the components you want to clean or
sanitize. See pages specific to the model you are
working on for removal procedures for these
parts.
3. Soak removed parts in a properly mixed solution.
4. Use a soft-bristle brush or sponge (NOT a wire
brush) to carefully clean the parts.
5. Use the solution and a brush to clean all
disassembled components and the inside of the
bin.
6. Install the removed parts.
7. Turn on the water and electrical supply.
!
Warning
Disconnect electric power to the ice machine at the
electric switch box before proceeding.
!
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or
Sanitizer.
Solution
Type
Water Mixed With
Cleaner 1 gal. (4 L) 16 oz. (500 ml) cleaner
(Part #000000084)
Sanitizer 3 gal. (11 L) 2 oz. (60 ml) sanitizer
(Part#94-0565-3)
!
Caution
Do not mix Cleaner and Sanitizer solutions together.
It is a violation of Federal law to use these solutions
in a manner inconsistent with their labeling.