Service manual

6-3
Section 6
Service
Bin Switch Removal
Q130
1. Disconnect power to the ice machine at service
disconnect.
2. Disconnect bin switch wires in control box.
3. Depress tab on right side of evaporator with
thumb.
4. Slide bin switch to right to remove.
5. Pull wiring into evaporator compartment.
Q210/Q270
1. Disconnect power to the ice machine at service
disconnect.
2. Disconnect bin switch wires in control box.
3. Insert a small screwdriver through the hole
located in the top of the bin switch, and depress
mounting tab slightly.
4. While depressing mounting tab roll bin switch
to right to release.
5. Pull wiring into evaporator compartment.
TAB
BIN SWITCH
BIN SWITCH
INSERT SCREWDRIVER
AND DEPRESS TAB
S
V17
3
1
G
S
V1
695
B