Service manual

Maintenance Section 4
4-8
ICE DAMPER REMOVAL/INSTALLATION
Removal
1. Grasp left side of ice damper and apply pressure
against the right-hand ice damper mounting
bracket.
2. Pull forward on the ice damper until the left-hand
mounting pin disengages.
Installation
1. Grasp the right side of ice damper and place left
hand pin in the mounting bracket.
2. While applying pressure against the left-hand
mounting bracket push the damper until the right-
hand mounting pin engages.
FRONT PANEL REMOVAL
1. Remove the two screws on the bottom of the front
panel.
2. Pull forward and down on the bottom panel until
the upper tabs disengage from the slot.
REMOVE SCREWS
STEP 1
STEP 2
SV1731F
STEP 2
STEP 1
SV1731G