Service manual

Section 4 Maintenance
4-7
WATER DISTRIBUTION TUBE REMOVAL
1. Remove the ice thickness probe.
2. Disconnect the water hose from the distribution
tube.
Water Distribution Tube Removal
3. Loosen the two thumbscrews, which secure the
distribution tube.
4. Lift the distribution tube up off the thumbscrews.
5. Disassembly for cleaning.
A. Twist the barbed end until the tab lines up
with the keyway
B. Pull the inner tube end outward.
Water Distribution Tube Disassembly
FLOAT VALVE REMOVAL
1. Turn off the water supply to the ice machine at
the water supply valve.
2. Turn the splash shield counterclockwise one or
two turns.
Float Valve Removal
3. Pull the float valve forward and off the mounting
bracket.
4. Disconnect the water inlet tube from the float
valve by unscrewing the compression fitting.
5. Remove the cap and filter screen for cleaning.
SV1741
TAB
KEYWAY
SV1731d
THUMBSCRE
W
DISTRIBUTION
TUBE
THUMBSCRE
W
SPLASH SHIELD
FLOAT
SHUT-OFF
VALVE
COMPRESSION
FITTING
FLOAT VALVE
BRACKET
SV1695-2
REMOVE ICE
THICKNESS
PROBE