Service manual

Section 4 Maintenance
4-5
BIN DOOR REMOVAL
WARNING
Before removing any parts, unplug or disconnect
the electric power to the ice machine at the electric
service switch box, and turn off the water supply to
the ice machine.
1. Disconnect the electric power to the ice machine
and remove ice from bin.
2. Remove the rear thumbscrew while positioning
your hand beneath the door pin and gasket.
3. Apply upward pressure on the door and remove
the door pin and gasket.
4. Repeat steps 2 and 3 for the front thumbscrew,
door pin and gasket.
5. Remove the door by lowering the right side and
allowing the left side door pins to disengage the
track.
Removing the Door
WATER PUMP REMOVAL
WARNING
Disconnect the electric power to the ice machine at
the electric service switch box and turn off the
water supply.
Water Pump Removal
1. Disconnect the water pump power cord.
2. Disconnect the hose from the pump outlet.
3. Loosen the screws securing the pump-mounting
bracket to the bulkhead.
4. Lift the pump and bracket assembly off the
screws.
SCREWS
PUMP
MOUNTING
BRACKET
PUMP
OUTLET
SV1694-1
SV1682B