Specifications

54 Part Number STH12 9/10
Cleaning and Sanitizing the Dispensing
Valves and Product Lines
MAINTENANCE SCHEDULE
Every day
Dispensing
valves
Remove nozzles and diffusers and
soak in mild detergent cleaning
solution. Scrub parts with small bristle
brush taking care to clean small
crevices and O-ring grooves. Turn
OFF power to dispensing valves.
Scrub exterior surfaces, including
bottom splash area and actuator
lever, with cleaning solution.
Reassemble diffusers and nozzles.
Wipe dry exterior surfaces before
turning ON power.
Drip pan and
drain hose
Wash with mild detergent. Rinse with
clean water.
Quick
disconnects
Wash with mild detergent. Rinse with
potable water.
Weekly
Outside,
dispenser
cabinet
Wash with clean water and mild
detergent. Wipe dry.
Every 3 months
Syrup
circuits
Sanitize each syrup circuit. See
“Cleaning and Sanitizing Procedure”.
Water bath Drain, melt ice and clean using
detergent and brush; rinse with
potable water. Do not use water over
140°F (60°C).
Every 6 months
Condenser Vacuum fins or use soft bristle brush
(scrub brush).
Air purifier
filter (if
equipped)
Replace.