Specifications

Part Number STH12 9/10 15
Also consider the location of the following items
before installation:
Top Mounted Ice Maker Installations
Water line
Drain
Power outlet
Heating and air conditioning ducts
Location — Avoid placing the dispenser
and/or ice machine near heat sources such
as radiators, ovens, refrigeration equipment
and direct sunlight.
Clearances — Six inch (15.2 cm) clearance
on all sides of the icemaker is needed.
Front of icemaker to be flush with front of
dispenser — The front of the icemaker must
be flush with the front of the dispenser. When
the icemaker is flush with the front of the
dispenser, some icemakers may overhang at
the back of the dispenser.
Drains — A separate drain line is required
for the ice machine, in addition to a drain line
for the ice/beverage dispenser.
Dispensers require an adapter kit to install
some top-mounted icemakers. Contact your
local distributor for the correct adapter kit.