Specifications

Multiplex Company, Inc.
Fountain Troubleshooting Guide
1
00218012 Revision B (KAK) 7 August, 2000
Caution: To Avoid Serious Injury
Important: Read the following warnings before beginning an installation.
Failure to do so may result in possible death or serious injury.
DO Adhere to all National and Local Plumbing and Electrical Safety
Codes.
DO Turn off incoming electrical service switches when servicing,
installing, or repairing equipment.
DO Check that all flare fittings on the carbonation tank(s) are tight.
This check should be performed with a wrench to ensure a quality
seal.
DO Inspect pressure on Regulators before starting up equipment.
DO Protect eyes when working around refrigerants.
DO Use caution when handling metal surface edges of all equipment.
DO Handle CO
2 cylinders and gauges with care. Secure cylinders
properly against abrasion.
DO Store CO
2 cylinder(s) in well ventilated areas.
DO NOT Throw or drop a CO
2 cylinder. Secure the cylinder(s) in an upright
position with a chain.
DO NOT Connect the CO
2 cylinder(s) directly to the product container.
Doing so will result in an explosion causing possible death or
injury. Best to connect the CO
2 cylinder(s) to a regulator(s).
DO NOT Store CO2 cylinders in temperature above 125°F (51.7°C) near
furnaces, radiator or sources of heat.
DO NOT Release CO
2 gas from old cylinder.
DO NOT Touch Refrigeration lines inside units, some may exceed
temperatures of 200°F (93.3°C).
Notice: Water pipe connections and fixtures directly connected to a potable
water supply shall be sized, installed and maintained in accordance with
Federal, State, and Local codes.