Specifications
Multiplex Company, Inc.
Complete System Overview
00218010 Revision B (KAK) 31 July, 2000
4
Carbonation System
Carbonator Pump off
Carbon dioxide (CO2) regulated to 90 psi (6.3 bar) passes through a single check valve, which
prevents water from backing up into the CO
2 supply, and fills the carbonator tank with CO2.
The incoming filtered water at 55 psig (3.9 bar) feeds the brass carbonator pump, then
proceeds through a stainless steel cooling coil located in the 32°F (0°C) water bath. Chilled water is
then delivered to the double check valve on top of the carbonator tank. CO
2 is prevented from
leaving the carbonator tank through the fresh water supply by the double check valve.
When the carbonator motor is off, the high CO
2 pressure within the carbonator tank prevents
replacement water from entering the carbonator tank.
Ice Water Bath 32°F (0°C)
Carbonation
Tank
Carbonated
Water
Pick-up Tube
CO
2
90psig (6.3bar)
Liquid Level Control
Water
55psig
(3.9bar)
Motor
Cooling Coil
Check Valves
55psig (3.9bar)
Electrodes