Specifications
Multiplex Company, Inc.
Complete System Overview
3
00218010 Revision B (KAK) 31 July, 2000
Water Filter System
Incoming water pressure is to be maintained at 55 psig (3.9 bar) to ensure proper flow
throughout the system. An in-line water regulator and gauge controls high water pressure and
allows for pressure monitoring.
Water enters the pre-filter(s) that remove the coarse particles that are contained in the supply
water, protecting the fine filter.
Water flows from the pre-filter(s) to the taste/odor activated carbon filter, absorbing taste and
odor causing chemicals, such as chlorine and sulfur.
Finally, water runs through a fine filter, filtering out the finer particles left in the supply water,
thus protecting the equipment and helping to insure quality water for carbonation.
Pressure gauges located before and after the filtration system allow the monitoring of pressure
across the filter system, indicating clogged filters and the need for replacement.
Incoming
Water
Taster/Order Activated
Carbon Filter
55psig (3.9bar)
To the
Carbonation System
Regulator
Pre-filter
Fine Filter