Specifications

Multiplex Company, Inc.
Complete System Overview
00218011 Revision B (KAK) 31 July, 2000
2
Water Filter
Function of the water filter
Filters out both solid and suspended impurities found in the water supply. Preventing damage to
components, insuring proper absorption of CO
2 into the water and a drink free of off taste.
Failure of the water filter
Solids
With use, filter will become restricted to the point of starving water pumps, effecting drink
recovery rate.
Suspended
With use, filters will become saturated, effecting drink taste.
Notes:
w Examine water pressure gauge, if pressure drops 40 psi (2.8 bar) or more, when
carbonator pumps cycle, put filter on by-pass and replace
w Must activate filter to fully coat element and allow for good filtration and filter life
(Everpure only)
w Filter life is determined by:
Filter Activation
Water Volume
Water Quality (dirt)
Water Pressure
Activate Filter by (activate
when system is not in use):
1. Put filter on by-pass.
2. Open activation valve (to
relieve pressure).
3. Replace cartridge.
4. Slowly take filter off by-
pass (leaving activation
valve open).
5. Activate for proper
amount of time.