Troubleshooting guide

33
Installation and Service Manual
USER MAINTENANCE
BAG-IN-BOX SYSTEM
10. Connect Bucket 3 to system.
11. Draw sanitizing solution through system until so-
lution is dispensed.
12. Repeat step 11 until all syrup circuits contain sani-
tizer solution.
13. Allow sanitizer solution to remain in system for 15
minutes.
14. Remove nozzles and diffusers from beverage
valves.
15. Scrub nozzles, diffusers and all removable valve
parts (except electrical parts) with a plastic brush
or a soft cloth and the detergent solution.
16. Soak nozzles, diffusers and removable valve parts
(except electrical parts) in sanitizer for 15 minutes.
17. Replace nozzles, diffusers and valve parts.
18. Connect Bucket 1 to system.
19. Draw rinse water through system until no presence
of sanitizer is detected.
20. Attach syrup connectors to BIB’s.
21. Draw syrup through system until only syrup is dis-
pensed.
22. Discard first 2 drinks.