Service manual

Section 9 Replacement Procedures
9-13
3. Remove the (3) three hinge mounting screws
from each hinge on the cabinet front
(Figure 9.36). Replace the hinge and reattach
with the screws.
4. Remove the (3) three hinged mounting screws
from each flange on the door (Figure 9.37) and
replace hinge.
5. Install the door and check operation
Door Gasket (solid doors)
1. Remove the old gasket by pulling the gasket
from the foamed in retainer in the door.
(See figure 9.38)
2. Starting the upper left corner of the door, place
the locking male lip into the retainer of the door.
3. Firmly press into place until the gasket locks.
4. If necessary, gently tap into place with a rubber
mallet.
Figure 9.36
Figure 9.37
Figure 9.38