Service manual

Replacement Procedures Section 9
9-12
Door Handle (glass doors)
1. Pry or lift off a small section of door gasket
behind the door handle, exposing the (2) handle
mounting screws (Figure 9.33).
2. Remove the two mounting screws to release the
handle.
3. Replace door handle.
4. You may need a rubber mallet to re-install
gasket.
Door Hinge (solid doors)
1. Remove the door by lifting straight up
(Figure 9.34). Carefully set the door aside.
2. Pry off the hinge cover with a thin flat blade
screwdriver (Figure 9.35).
Continued next page…
Figure 9.33
Figure 9.34
Figure 9.35