Service manual

Replacement Procedures Section 9
9-10
Digital Thermometer Transformer
WARNING
Disconnect the electric power to the freezer before
proceeding with the following steps.
1. Remove the front louvered hatch cover by
lifting straight up and pulling straight out.
2. Remove the (6) screws from the wiring box
front (Figure 9.27)
3. Disconnect the black and white wires on the
transformer from the power and neutral wires in
the wiring box. (Figure 9.28).
4. Disconnect the yellow wires on the transformer
from the (2) gray wires on the transformer probe
(Figure 9.28)
5. Remove the transformer from the evaporator
housing and replace with the new transformer.
6. Reconnect all wiring.
7. Replace the top louvered hatch cover.
8. Power up the freezer.
9. Return to normal operation.
Figure 9.27
Figure 9.28