Service manual

Replacement Procedures Section 9
9-6
Evaporator Drain Pan Heater Element
WARNING
Disconnect the electric power to the freezer before
proceeding with the following steps.
1. Remove front louvered hatch cover by lifting up
and pulling straight out.
2. Remove the evaporator box cover lid
(Figure 9.19).
3. Remove coil mounting screws and lift coil up
slowly, not to detach lines or wiring
(Figure 9.20).
4. Disconnect the heater wires located in the
wiring box (Figure 9.21) for 2 & 3 section
cabinets or wiring bundle (Figure 9.22) for 1
section cabinets.
Continued next page…
Figure 9.19
Figure 9.20
Figure 9.21