User Manual
Table Of Contents
- Safety Notices
- Section 1
- Section 2
- Installation
- Indigo® NXT or Indigo® Model 22" & 30" Wide Single Evaporator Installation
- Indigo® NXT or Indigo® Model 48" Wide Single Evaporator Installation K00451 Indigo® & K00465 Indigo® NXT
- Indigo® NXT or Indigo® Two-Evaporator Ice Machine Model Installation K00434, K00451 Indigo® & K00465 Indigo® NXT
- NEO® Undercounter Model Installation
- Ice Beverage (IB) Single Evaporator Model Installation
- Installation
- Section 3
- Blank Page
24 Part Number: 000014110 Rev 01 1/19
Maintenance Section 3
Bulb Replacement
n
Warning
Disconnect power to ice machine at the
electrical disconnect. Pressing the power
button does not disconnect line voltage.
1. Disconnect all power to the ice
machine at the electrical disconnect.
2. Open the front door of the ice
machine and then remove the top
panel.
3. Disconnect the power connector from
the LuminIce® bulb.
4. Push bulb with finger and pull with
other hand toward the rear of the ice
machine until bulb is free.
5. Remove retainer from old bulb and
install on replacement bulb.
6. Align slot on LuminIce® and notch on
retainer and install replacement bulb
in LuminIce®.
7. Insert bulb until it seats in the retainer
stop on the opposite end.