User Manual
Table Of Contents
- Safety Notices
- Section 1
- Section 2
- Installation
- Indigo® NXT or Indigo® Model 22" & 30" Wide Single Evaporator Installation
- Indigo® NXT or Indigo® Model 48" Wide Single Evaporator Installation K00451 Indigo® & K00465 Indigo® NXT
- Indigo® NXT or Indigo® Two-Evaporator Ice Machine Model Installation K00434, K00451 Indigo® & K00465 Indigo® NXT
- NEO® Undercounter Model Installation
- Ice Beverage (IB) Single Evaporator Model Installation
- Installation
- Section 3
- Blank Page
16 Part Number: 000014110 Rev 01 1/19
Installation Section 2
NOTE: The bulb and bulb wiring must face
toward the top of the ice machine to allow
bulb replacement with LuminIce® in place.
5. Attach LuminIce® assembly to corner
post with two screws.
6. Refer to picture and install LuminIce®
hoses.
NOTE: Proceed to the next step for your
specific LuminIce® kit number. Installation
varies depending on whether power for the
LuminIce® is supplied by the control board
or a switching power supply needs to be
installed.