User Manual

30 Part Number 000014141 Rev 07 2/20
Installation Section 2
Step 4 Open Valves for the Line Set and
Receiver.
You will not hear refrigerant flow when the
valves are opened. Refrigerant will not flow
until the ice machine is started and the
solenoid valve opens.
• All valve caps must be reinstalled,
tightened and leak-checked to assure no
refrigerant leakage exists.
• Counterclockwise opens all valves. Open
the shutoff valves for the suction and
liquid lines.
USE ALLEN WRENCH TO OPEN
(TURN COUNTERCLOCKWISE)
SHUTOFF VALVES FOR THE LIQUID
AND SUCTION LINES
QuietQube Models
USE ALLEN WRENCH
TO OPEN (TURN
COUNTERCLOCKWISE)
SHUTOFF VALVES
FOR THE LIQUID AND
SUCTION LINES
Ice Beverage Models
USE ALLEN WRENCH TO OPEN
(TURN COUNTERCLOCKWISE)
SHUTOFF VALVES FOR THE
LIQUID AND SUCTION LINES
IF1400C/IF1800C/IF2100C
Notice
After opening suction, discharge and
receiver service valves, refrigerant
pressure will not be detected until the
ice machine starts a freeze cycle and the
solenoid valves energize.