User Manual

16 Part Number 000014141 Rev 07 2/20
Installation Section 2
Condensing Unit Clearance Requirements
Model Top/Sides Back Front
CVDF0600
CVDF0900
CVDT1200
CVDF1400
CVDF1800
CVDF2100
0"*
(0 cm)
48"
(122 cm)
48"
(122 cm)
* 24" (61 cm) is recommended on top/sides for
servicing
Notice
The ice machine must be protected if it
will be subjected to temperatures below
32°F (0°C). Failure caused by exposure to
freezing temperatures is not covered by
the warranty.
Air Baffle
Self-Contained Air-cooled Only
The air-cooled baffle prevents condenser
air from recirculating.
To install:
1. Loosen the back panel screws next to
the condenser.
2. Align the keyhole slots in the air baffle
with the screw holes and slide the
baffle down to lock in place.
Bin Installation Requirements
• The installation area must be capable of
supporting the combined weight of the
equipment and product.
• All ice machines installed on a bin
require an ice deflector.
• Manitowoc bins have a deflector
installed and require no modifications
when used with a forward-facing
evaporator.
• Ice machines with multiple evaporators
require a deflector kit.
• Align sides and back of ice machine with
sides and back of bin when placing ice
machine on bin.
• Optional sales kits are available to adapt
various sized or multiple ice machines on
large bins.