Service Manual

38 Part Number: 000015430 Rev 02 5/20
Detailed Descaling/Sanitizing Procedure
This procedure must be performed a minimum of once
every six months.
• The ice machine and bin must be disassembled
descaled and sanitized.
• All ice produced during the descaling and sanitizing
procedures must be discarded.
• Removes mineral deposits from areas or surfaces that
are in direct contact with water.
Remedial Cleaning Procedure
• This procedure descales all components in the water
flow path, and is used to clean the ice machine
between the bi-yearly detailed descaling/sanitizing
procedure.
IAUCS®
iAuCS® does not operate when the Clean button is used to
start a clean cycle. To prime the hose, activation is required
through the Service Menu/iAuCS® icon.
Exterior Cleaning
Clean the area around the ice machine as often as
necessary to maintain cleanliness and efficient operation.
Wipe surfaces with a damp cloth rinsed in water to remove
dust and dirt from the outside of the ice machine. If a
greasy residue persists, use a damp cloth rinsed in a mild
dish soap and water solution. Wipe dry with a clean, soft
cloth.
The exterior panels have a clear coating that is stain
resistant and easy to clean. Products containing abrasives
will damage the coating and scratch the panels.
• Never use steel wool or abrasive pads for cleaning.
• Never use chlorinated, citrus based or abrasive
cleaners on exterior panels and plastic trim pieces.