User Manual

n
Warning
Follow these precautions to prevent personal injury during installation of this
equipment:
• Installation must comply with all
applicable equipment fire and health
codes with the authority having
jurisdiction.
• To avoid instability the installation area
must be capable of supporting the
combined weight of the equipment and
product. Additionally the equipment
must be level side to side and front to
back.
• Ice machines require a deflector when
installed on an ice storage bin. Prior to
using a non-OEM ice storage system
with this ice machine, contact the
bin manufacturer to assure their ice
deflector is compatible.
• Prior to installing a non-OEM ice storage
system with this ice machine, follow the
manufacturers installation procedures
and verify the location and installation
meets the local/national mechanical
codes and stability requirements.
• Remove all removable panels before
lifting and installing and use appropriate
safety equipment during installation
and servicing. Two or more people are
required to lift or move this appliance to
prevent tipping and/or injury.
• Legs or casters must be installed and
the legs/casters must be screwed in
completely. When casters are installed
the mass of this unit will allow it to move
uncontrolled on an inclined surface.
These units must be tethered/secured
to comply with all applicable codes.
Swivel casters must be mounted on the
front and rigid casters must be mounted
on the rear. Lock the front casters after
installation is complete.
• Connect to a potable water supply only.
• Do not damage the refrigeration circuit
when installing, maintaining or servicing
the unit.
• This equipment contains refrigerant
charge. Installation of the line sets must
be performed by a properly trained and
EPA certified refrigeration technician
aware of the dangers of dealing with
refrigerant charged equipment.