User Manual

32 Part Number 000014141 Rev 07 2/20
Installation Section 2
Starting the Ice Machine
Starting the ice machine and completing
the Operational Checks are the
responsibilities of the owner/operator.
Adjustments and maintenance procedures
outlined in this manual are not covered by
the warranty.
REMOVE ICE THICKNESS PROBE
SHIPPING BRACKETS
Remove and discard shipping brackets
before starting the ice machine.
Step 1 Ice machine must be programmed
refer to “Setup Wizard” on page 37 for
details.
Step 2 Refer to “Descaling and
Sanitizing” on page 43 and clean and
sanitize the ice machine and bin before
placing in operation.
Step 3 Refer to “Ice Making Sequence of
Operation” on page 39 for operational
details.
MINIMUM/MAXIMUM SLAB WEIGHT
Adjust ice thickness to maintain the correct
bridge thickness and “Minimum/Maximum
Slab Weight” on page 41.
Warranty
For warranty information visit:
www.manitowocice.com/Service/Warranty
• Warranty Coverage Information
• Warranty Registration
• Warranty Verification
Warranty coverage begins the day the ice
machine is installed.
WARRANTY REGISTRATION
Completing the warranty registration
process is a quick and easy way to protect
your investment.
Scan the QR code with your smart device or
enter the link in a web browser to complete
your warranty registration.
WWW.MANITOWOCICE.COM/SERVICE/WARRANTY#WARRANTY-REGISTRATION
Registering your product insures warranty
coverage and streamlines the process if any
warranty work is required.