User Manual

Part Number 000014141 Rev 07 2/20 25
Section 2 Installation
Remote Condenser and Condensing Unit Refrigeration System Installation
Each ice machine head section ships from the factory with a refrigerant charge
appropriate for the entire system operation. The serial tag on the ice machine indicates
the refrigerant charge.
QuietQube® Ice
Machine
Remote Condenser Line Set*
Additional Refrigerant
Charge for 50' to 100'
(15 to 30 Meter) Line Sets
IF0600C
IBF0620C
CVDF0600
RC-21
RC-31
RC-51
1.5 lbs - 680 g
IBF0820C
IF0900C
CVDF0900 2 lbs - 907 g
IBT1020C
CVDT1200
2 lbs - 907 g
IT1200C 2 lbs - 907 g
IF1400C CVDF1400 RC-20
RC-30
RC-50
2 lbs - 907 g
IF1800C CVDF1800 2 lbs - 907 g
IF2100C CVDF2100
RC-23
RC-33
RC-53
4 lbs - 1814 g
*Line Set Suction Line Liquid Line Minimum Insulation Thickness
RC 21/31/51
5/8 inch
16 mm
3/8 inch
10 mm
1/2" (13 mm) Suction Line
1/4" (7 mm) Liquid Line
RC 20/30/50
3/4 inch
19 mm
1/2 inch
13 mm
1/2" (13 mm) Suction Line
1/4" (7 mm) Liquid Line
RC 23/33/53
3/4 inch
19 mm
5/8 inch
16 mm
1/2" (13 mm) Suction Line
1/4" (7 mm) Liquid Line
n
Warning
Installation of a QuietQube® Condensing
Unit may require the use of special
equipment for placement. Trained and
qualified personnel are required for proper
rigging and lifting. Holes are provided on
the corners of the condensing unit to allow
the use of lifting shackles.
Important
Manitowoc remote systems are only
approved and warranted as a complete
new package. Warranty on the refrigeration
system will be void if a new ice machine
head section is connected to pre-existing
(used) tubing or condensing units or vice
versa.