Service Manual

50 Part Number: 000015430 Rev 02 5/20
Removal from Service/Winterization
General
Special precautions must be taken if the ice machine is to
be removed from service for an extended period of time or
exposed to ambient temperatures of 32°F (0°C) or below.
Notice
If water is allowed to remain in the ice machine in freezing
temperatures, severe damage to some components
could result. Damage of this nature is not covered by the
warranty.
Follow the applicable procedure below.
AIR-COOLED ICE MACHINES
1. Turn off the ice machine by pressing the On/Off
Button.
2. Turn off the water supply.
3. Remove the water from the water trough.
4. Disconnect and drain the incoming ice-making water
line at the rear of the ice machine.
5. Energize the ice machine and wait one minute for the
water inlet valve to open - or - Energize all relays in
the touchscreen service menu.
6. Blow compressed air in both the incoming water and
the drain openings in the rear of the ice machine until
no more water comes out of the water inlet lines or
the drain.
7. Disconnect the electric power at the circuit breaker or
the electric service switch.
8. Make sure water is not trapped in any of the water
lines, drain lines, distribution tubes, etc.