Service Manual

182 Part Number: 000015430 Rev 02 5/20
SELF-CONTAINED MODEL PROCEDURE
Do not purge refrigerant to the atmosphere. Capture
refrigerant using recovery equipment. Follow the
manufacturer’s recommendations.
Notice
Manitowoc assumes no responsibility for the use of
contaminated refrigerant. Damage resulting from the
use of contaminated refrigerant is the sole responsibility
of the servicing company.
Notice
Replace the liquid line drier after recovering the
refrigerant and before evacuating and recharging. Use
only a Manitowoc (OEM) liquid line filter-drier to prevent
voiding the warranty.
Connections
Manifold gauge sets must utilize low loss fittings to comply
with local rules and regulations.
Make these connections:
• Suction side of the compressor through the suction
access valve.
• Discharge side of the compressor through the
discharge access valve.
• Liquid side through the liquid line drier.