Owner's Manual

30 Part Number: 000013325 Rev 02 6/17
Operation Section 3
Main Menu
From the Home screen, press the Menu button to enter
the Main menu, where you can choose to see machine
information, make setup changes, set the Energy Saver
mode, or enter the Service Menu.
MACHINE INFO MENU
From the Main menu, ensure that Machine Info is
highlighted and press the Checkmark to view a list including
capacity, model number, Ice Machine Head serial number,
condenser serial number, warranty, installation date, date
of manufacture and software versions. Use the Down
arrow to highlight an item and use the Checkmark to view
the information. Press the Left arrow to return to previous
screens.
PASSWORD ENTRY
A password is not required, although a password can
be turned on to prevent unauthorized control setting
modification. You can use the Factory Default Password
of “1234” or enter a four digit custom pin number of your
choosing.
To turn on the password feature use the following procedure.
1. Press the Menu button.
2. From the Main menu, use the Down arrow to highlight
Set-Up and press the Right arrow.
3. Use the Down arrow to highlight Password ON and press
the Right arrow.
4. Press the Right arrow again with Enter Passwrd
highlighted and an icon will flash.
5. Use the Up and Down arrows to enter the factory
password (1, 2, 3, 4). Enter the number 1 in the flashing
icon (first digit of the factory password).
6. Press the Right arrow to move to the next cell and use
the Up and Down arrows to add the number 2. Repeat
this process to add 3 and 4.
7. When the last number is entered press the Checkmark
button to save your entry.
[
]
Exit >
Enter Passwrd
▲
To enter a four digit password of your choosing use the
following procedure.
1. Press the Menu button.
2. From the Main menu, use the Down arrow to highlight
Set-Up and press the Right arrow.
3. Use the Down arrow to select Edit Password and press
the Right arrow.
4. Using the Up and Down arrows, enter the first digit of
the factory password in the flashing icon.
5. Press the right arrow to move to the next cell and use
the Up and Down arrows to add the number 2. Repeat
this process to add 3 and 4.
6. When the last number is entered press the Checkmark
button.
7. Follow steps 4 and 5 and enter your 4 digit password.
8. When the last number is entered press the Checkmark
button to save your entry.
Reset Password to Factory Defaults
The password can be reset to the factory defaults when
required. The default factory password is 1234. To reset the
ice machine to factory defaults, use the following procedure.
1. Press the Menu button.
2. From the Main menu, use the Down arrow to highlight
Fact Deflts.
3. Press the Checkmark two times to reset the ice machine.
The display will return to the Set-Up menu and the
defaults listed below will be in effect. Refer to Set-Up
Menu to adjust settings.
Setting Default
Language English
Time & Date Central Time Zone
Time Config Month/Day/Year/24 Hour
Units Fahrenheit/Lbs/Gallons
Ice Clarity Off
LCD Bright Level 2
Password On/Off Off
Clean Minder Off
AuCS RunTime Off
Air Filter Off
Water Filter Off
LuminIce™ Replace Bulb
Reminder
Off