Service Manual
Table Of Contents
- Safety Notices
- Definitions
- General Information
- Installation
- Stacking Two Ice Machines on a Single Storage Bin
- Location of Ice Machine
- Clearance Requirements
- Dual Evaporator Model Installation on a Manitowoc Bin
- Ice Machine on a Dispenser Installation
- Water Supply and Drains
- Lineset Applications
- QuietQube® Remote Condensing Unit
- Additional Refrigerant Charge For 51' to 100' Line Sets
- Maintenance
- Operation
- Menu Navigation
- Component Check Procedures
- Control Board, Display And Touchscreen
- Operating an ice machine without a Touchscreen
- Control Board Relay Test
- Programming A Replacement Control Board
- USB Flash Drive Specifications and Formatting
- Exporting Data to a Flash Drive
- Upgrading Firmware with a Flash Drive
- Main Fuse
- Bin Switch
- Water Level Control Circuitry
- Ice Thickness Probe (Initiates Harvest)
- Bin Level Probe
- Thermistors
- High Pressure Cutout (HPCO) Control
- Low Pressure Cutout (LPCO) Control
- Compressor Time Delay
- Fan Cycle Control
- Harvest Assist Air Pump
- Compressor Electrical Diagnostics
- Diagnosing Start Components
- Refrigeration Components
- Recovery/Evacuation/Charging Procedures QuietQube® Models
- System Contamination Clean-Up
- Total System Refrigerant Charge QuietQube® CVD Models
- Control Board, Display And Touchscreen
- Charts
- Diagrams
“Part Number: 000015431 Rev 02 6/20” 77
Settings
Language
Select Language
Reminders
Clean Reminder
Set Month Interval
Air Filter
Set On/Off/Interval
Water Filter
Set Reminder
Configure Date & Time
Configure Date & Time
Set Time
Set Date
Units
Standard or Metric
Brightness
Adjust Touch Screen Brightness For Sleep Mode or
Inactivity.
NOTE: 100% brightness is activated by touching the
screen when the lock feature is off.
USB
Import Settings To Ice Machine
Export Settings To USB
iAuCS
When the iAuCS is detected, the icon will appear in the
settings menu to set frequency of cleanings with iAuCS