Service Manual

Part Number: 000015431 Rev 02 6/20 31
Ice Machine on a Dispenser Installation
No deflector is needed for machines that match the size of
the dispenser (30" head section on a 30" dispenser) unless
required by the dispenser manufacturer.
Adapters are required when a smaller ice machine is going
on a larger dispenser (22" machine on a 30" dispenser).
Ice level management is recommended to prevent water
leakage or movement of ice machine during agitation.
A dispenser baffle is required to prevent ice from
contacting the ice machine door and prevent possible
water leakage. K00348 is used on 22" ice machines and
K00346 is used on 30" ice machines.
Important
Manitowoc Ice/Beverage Ice Machines require an
adapter for mounting. Adapters are not included with
the ice machine, dispenser or bin and must be ordered
separately. When a non-Manitowoc adapter is used,
verify the adapter is compatible with Manitowoc Ice/
Beverage Ice Machines prior to installation.
n
Warning
Ice Beverage ice machines, adapter plates and adapter
covers must be secured to the dispenser to prevent
tipping or dislodging during agitation.