Specifications

44 Part Number STH025 2/14
Step 4 Wait until the clean cycle is complete
(approximately 24 minutes). Then disconnect power to
the ice machine (and dispenser when used).
Step 5 Remove parts for cleaning.
Please refer to the proper parts removal for your ice
machine. Continue with step 6 when the parts have
been removed.
Single Evaporator Ice Machines - page 48
Step 6 Mix a solution of cleaner and lukewarm water.
Depending upon the amount of mineral buildup, a
larger quantity of solution may be required. Use the
ratio in the table below to mix enough solution to
thoroughly clean all parts.
! Warning
Disconnect the electric power to the ice machine
at the electric service switch box.
Solution
Type
Water Mixed With
Cleaner 1 gal. (4 L) 16 oz (500 ml)
cleaner