Service manual

Section 3 Maintenance

Part No. 80-1206-3 3-17

Water Trough Removal

SU1000C/SerVend UC-300 Dispenser

1. Remove the quarter turn fasteners (turn

counterclockwise) securing the trough in place.

2. Pull forward on the water trough until the rear pins

disengage from the water trough.

3. Lift up and forward on the front of the water trough

while allowing the rear of the water trough to drop.

4. Remove the water trough from the ice machine.

Water Trough Removal

Q1400C/QDUALC

1. Remove the front splash shield, water pump and

float valve from the ice machine.

2. Remove the quarter turn fasteners (turn

counterclockwise) securing the trough in place.

3. Lift up and forward on the front of the water trough

while allowing the rear of the water trough to drop.

4. Remove the water trough from the ice machine.

Warning

Disconnect the electrical power to the ice machine

at the electrical disconnect before proceeding.

SV3005

(PINS LOCATED BEHIND WATER TROUGH)

Warning

Disconnect the electrical power to the ice machine

at the electrical disconnect before proceeding.

SV1771B

REMOVE THE TWO

1/4 TURN FASTENERS

BY TURNING

COUNTERCLOCKWISE