Service manual

Maintenance Section 3

3-16

Part No. 80-1206-3

Float Valve

Q1400C/SU1000C

1. Turn off the water supply to the ice machine at the

water service valve.

2. Turn the splash shield counterclockwise one or two

turns.

Float Valve Removal

3. Pull the float valve forward and off the mounting

bracket.

4. Disconnect the water inlet tube from the float valve

at the compression fitting.

5. Remove the filter screen and cap for cleaning.

Water Trough Removal

IB0600C/IB0800C/IB1000C

1. Remove water level probe screw to avoid damaging

the water level probe during water trough removal.

2. Remove the quarter turn fasteners (turn

counterclockwise) securing the trough in place.

3. Pull forward on the water trough until the rear pins

disengage from the water trough.

4. Lift up and forward on the front of the water trough

while allowing the rear of the water trough to drop.

5. Remove the water trough from the ice machine.

Warning

Disconnect the electrical power to the ice machine

at the electrical disconnect before proceeding.

WATER INLET

TUBE

ON/OFF SLIDE

SWITCH

SPLASH

SHIELD

FILTER

SCREEN

AND CAP

COMPRESSION

FITTING

SV1217

Warning

Disconnect the electrical power to the ice machine

at the electrical disconnect before proceeding.

(PINS LOCATED BEHIND WATER TROUGH)

SV3089A