Service manual

Section 3 Maintenance
Part No. 80-1206-3 3-11
Splash Shield
Q1400C/QDUAL
1. Pull forward on left and right nylatch connectors
until disengaged from ice machine (connectors
remain attached to splash shield).
2. Remove panel from front of ice machine by lifting
forward and up.
Splash Shield
IB0600C/IB0800C/IB1000C
1. Remove quarter turn connector from the right side
of splash shield.
2. Gently bow the center of the splash shield and lift up
and forward to remove.
Important
Splash Shield must be reinstalled to prevent water
leakage.
NYLATCH CONNECTORS
PULL FORWARD TO
DISENGAGE
SV1771A
Important
Splash Shield must be reinstalled to prevent water
leakage.
2. BOW IN CENTER
AND REMOVE
1. REMOVE 1/4 TURN
THUMBSCREW
SV3089