Specifications

Section 4 Maintenance
Part Number 000001528 4-3
D. Remove the water distribution tube
• Remove the clamp from the vinyl water hose on the
right side of the distribution tube.
Water Distribution Tube Removal
• Loosen the two thumbscrews which secure the
distribution tube.
SU1024YC - Loosen the three thumbscrews, which
secure the distribution tube.
• Lift the right side of the distribution tube up, and then
rotate it backward and to the right until the left side of
the distribution tube disengages the thumbscrew.
• Pull the vinyl hose off the distribution tube.
Disassemble for cleaning:
• Twist both of the inner tube ends until the tabs line up
with the keyways.
• Pull the inner tube ends outward.
E. Remove the float valve
• Turn off the water supply to the ice machine at the
water service valve.
• Turn the splash shield counterclockwise one or two
turns.
Float Valve Removal
• Pull the float valve forward and off the mounting
bracket.
• Disconnect the water inlet tube from the float valve at
the compression fitting.
• Remove the filter screen and cap for cleaning.
!
Caution
Do not force this removal. Be sure the locating tab is
clear before rotating the distribution tube back.
SV1620
1. LIFT UP
2. SLIDE BACK
3. SLIDE TO RIGHT
DISTRIBUTION
TUBE
THUMBSCREW
THUMBSCREW
LOCATING
PIN
3
2
1
WATER INLET
TUBE
ON/OFF SLIDE
SWITCH
SPLASH
SHIELD
FILTER
SCREEN
AND CAP
COMPRESSION
FITTING
SV1217