Service Manual
Table Of Contents
- General Information
- Model Numbers
- Installation
- Maintenance
- Troubleshooting
- Component Check Procedures
- Electrical Components
- Main Fuse
- ICE/OFF/CLEAN Toggle Switch
- Float Switch
- Ice Damper and Hall Effect Switches
- Selector Switch
- Dispense Lever Activated
- Touchless Sensor Activated
- Dispense Switch
- Touchless Sensor
- High Pressure Cutout Control
- Fan Cycle Control
- Low Pressure Cutout (LPCO) Control
- Compressor Electrical Diagnostics
- Diagnosing Start Components
- Refrigerant Recovery/Evacuation
- System Contamination Clean-Up
- Electrical Components
- Component Specifications
- Charts
- Diagrams
32 Part Number 000015432 4/18
ICE
WATER
ICE /
WATER
Add solution here
Step 7 Turn on the water supply to the ice machine.
Important
Leave the cleaner/water solution in the evaporator for
a minimum of 4 hours.
Step 8 Move the toggle switch to the ICE position. The
compressor will energize and produce ice with the cleaning
solution. Continue the freeze cycle for 15 minutes.
Step 9 Move the toggle switch to the OFF position,
then follow the standard cleaning and sanitizing
procedures.