Service Manual

Table Of Contents

Part Number 000015432 4/18 31

Heavily Scaled Cleaning Procedure

Ice machines that are heavily scaled or have not been

cleaned on a regular basis will need to run this Procedure.

Failure to do so may result in binding of the auger as the

lime scale releases from the auger and evaporator barrel.

Step 1 Remove panels and set the ICE/OFF/CLEAN

toggle switch to the OFF position.

Step 2 Remove all ice from the bin.

Step 3 Turn off the water supply to the ice machine.

Step 4 Place ICE/OFF/CLEAN toggle switch in the

CLEAN position. The dump valve will open and drain the

water from the evaporator and reservoir.

Step 5 Wait approximately 30 seconds (or until the

evaporator is drained) and place the toggle switch in the

OFF position.

Step 6 Refer to chart and add the correct amount of

cleaner for your model ice machine.

Model Amount of Cleaner

Part Number 000000084

CNF201 CNF202 12 ounces (355 ml)